Hi everyone,
I'm working on a project with a Raspberry Pi 5 and using the official M.2 HAT+ with an NVMe SSD. Everything works great on that side.
Now I want to connect an MLX90640 thermal camera via I2C, but the problem is that once the HAT is seated, I can't access the GPIO pins anymore to connect the camera (SDA/SCL/3.3V/GND).
How can I connect both the M.2 HAT+ and the MLX90640 camera safely
And also, I want to connect the camera module 2 is this ok with the voltage do I need more than using 27w original
thanks Adi
I'm working on a project with a Raspberry Pi 5 and using the official M.2 HAT+ with an NVMe SSD. Everything works great on that side.
Now I want to connect an MLX90640 thermal camera via I2C, but the problem is that once the HAT is seated, I can't access the GPIO pins anymore to connect the camera (SDA/SCL/3.3V/GND).
How can I connect both the M.2 HAT+ and the MLX90640 camera safely
And also, I want to connect the camera module 2 is this ok with the voltage do I need more than using 27w original
thanks Adi
Statistics: Posted by aadidi454 — Thu Apr 24, 2025 1:12 pm