HATs and other add-ons • Re: Raspberry Pi 5 PCIe Bus Error - ASM1166

Code:

0000:01:00.0 SATA controller: ASMedia Technology Inc. Device 1064 (rev 02) (prog-if 01 [AHCI 1.0])        Subsystem: ASMedia Technology Inc. Device 2116        !!! Unknown header type 7f        Interrupt: pin ? routed to IRQ 170        Region 0: Memory at 1b00080000 (32-bit, non-prefetchable) [size=8K]        Region 5: Memory at 1b00082000 (32-bit, non-prefetchable) [size=8K]        Expansion ROM at 1b00000000 [disabled] [size=512K]        Kernel driver in use: ahci        Kernel modules: ahci

Code:

02: PCI 100.0: 0106 SATA controller (AHCI 1.0)  [Created at pci.386]  Unique ID: VCu0.cl04_Rcc_0E  Parent ID: qLht.sFJvPhlHmw3  SysFS ID: /devices/platform/axi/1000110000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0  SysFS BusID: 0000:01:00.0  Hardware Class: storage  Model: "ASMedia SATA controller"  Vendor: pci 0x1b21 "ASMedia Technology Inc."  Device: pci 0x1064  SubVendor: pci 0x1b21 "ASMedia Technology Inc."  SubDevice: pci 0x2116  Revision: 0xff  Driver: "ahci"  Driver Modules: "ahci"  Memory Range: 0x1b00080000-0x1b00081fff (rw,non-prefetchable)  Memory Range: 0x1b00082000-0x1b00083fff (rw,non-prefetchable)  Memory Range: 0x1b00000000-0x1b0007ffff (ro,non-prefetchable)  IRQ: 170 (no events)  Module Alias: "pci:v00001B21d00001064sv00001B21sd00002116bc01sc06i01"  Driver Info #0:    Driver Status: ahci is active    Driver Activation Cmd: "modprobe ahci"  Config Status: cfg=new, avail=yes, need=no, active=unknown  Attached to: #3 (PCI bridge)