Hello
I have an M.2 PCI SATA Adapter (ASMedia Technology Inc. ASM1166 Serial ATA Controller (rev 02)).
It works mostly fine on CM4. Sometimes the CM4 doesn't boot, then a Power Reset is needed to get it running. After that, it runs perfectly fine.
I'm trying to migrate this to a Pi5. When placing the same M.2 Card with the same SATA drives attached, I can't get it to boot.
Is there more info I can collect or any settings I can change?
Cutout of the Log:Attachement:
- Pi5 Kernel dmesg (SATA Adapter INOP)
- CM4 kernel dmesg (SATA Adapter working)
I have an M.2 PCI SATA Adapter (ASMedia Technology Inc. ASM1166 Serial ATA Controller (rev 02)).
It works mostly fine on CM4. Sometimes the CM4 doesn't boot, then a Power Reset is needed to get it running. After that, it runs perfectly fine.
I'm trying to migrate this to a Pi5. When placing the same M.2 Card with the same SATA drives attached, I can't get it to boot.
Is there more info I can collect or any settings I can change?
Cutout of the Log:
Code:
[ 4.038427] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)[ 9.271968] ata1.00: qc timeout after 5000 msecs (cmd 0xec)[ 9.277756] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)[ 9.598425] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)[ 19.767966] ata1.00: qc timeout after 10000 msecs (cmd 0xec)[ 19.773851] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)[ 19.780173] ata1: limiting SATA link speed to 3.0 Gbps[ 20.098424] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 320)[ 50.487964] ata1.00: qc timeout after 30000 msecs (cmd 0xec)[ 50.493865] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)[ 50.814425] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 320)[ 51.146429] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)[ 56.375966] ata2.00: qc timeout after 5000 msecs (cmd 0xec)[ 56.381797] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)[ 56.702429] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)[ 66.871972] ata2.00: qc timeout after 10000 msecs (cmd 0xec)[ 66.877932] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)[ 66.884302] ata2: limiting SATA link speed to 3.0 Gbps[ 67.202430] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 320)[ 97.591966] ata2.00: qc timeout after 30000 msecs (cmd 0xec)[ 97.597914] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)[ 97.918427] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 320)[ 98.238429] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)[ 103.479967] ata3.00: qc timeout after 5000 msecs (cmd 0xec)[ 103.485841] ata3.00: failed to IDENTIFY (I/O error, err_mask=0x4)[ 103.806429] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)[ 113.975964] ata3.00: qc timeout after 10000 msecs (cmd 0xec)[ 113.981940] ata3.00: failed to IDENTIFY (I/O error, err_mask=0x4)[ 113.988350] ata3: limiting SATA link speed to 3.0 Gbps[ 114.306429] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 320)- Pi5 Kernel dmesg (SATA Adapter INOP)
- CM4 kernel dmesg (SATA Adapter working)
Statistics: Posted by batwing — Mon Nov 11, 2024 9:56 pm