Clik here to view.
HATs and other add-ons • Re: Raspberry Pi 5 PCIe Bus Error - ASM1166
To add further to this; today I updated the firmware on the ASM1166 6 port nvme sata card, and no change, though raspbian does not crash on boot now - until I connect a sata drive.(...)Which firmware...
View ArticleHATs and other add-ons • Re: NVMe x4 and x1 compatibility?
Good morning, for those who are interested, I have discovered a way how we can completely eliminate the error "PCIe Bus Error: severity=Corrected" in the raspberry pi 5 log without having to add...
View ArticleHATs and other add-ons • Re: RPi 5 with new NVMe Base from Pimoroni - strange...
Hello,Definitely no SD installed and the old SSD is no longer connected.See the following images for more infohttps://www.dropbox.com/scl/fi/r96hqiia ......
View ArticleHATs and other add-ons • Re: Build HAT and Light My Bricks kits
So I bought one of their "Power Up cable" and tested. Future internet travellers, please read below and be warned.TL;DRThe Power Up cable from Light My Bricks is not compatible with the Raspberry Pi...
View ArticleHATs and other add-ons • Can’t install sense hat emulator
I’m using a Raspberry pi 5 I recently bought and am running Raspberry Pi OSThe sense hat emulator didn’t come on the recommended software and installing from the documentation it says I need...
View ArticleHATs and other add-ons • GPIO connector
Where can I find a connector that's suitable for connecting devices to the Raspberry Pi 5?I got a connector the last week, but the pins are long enough to connect another device/HAT/BONNETStatistics:...
View ArticleHATs and other add-ons • Re: GPIO connector
Look at GPIO "riser header" (also known as booster header) on the Pi Hut or elsewhere.Statistics: Posted by neilgl — Thu Mar 07, 2024 11:19 am
View ArticleHATs and other add-ons • Recommended maximum 3.3V current draw for a HAT on...
Are there any guidelines regarding what is the permissible (or recommended) maximum current draw from the 3.3V power rail (i.e. the 3.3V pins on GPIO) for a HAT used with the Pi 5?From what I have...
View ArticleHATs and other add-ons • Re: NVME M.2 card from RPi Foundation
On February 28, 2024, Samsung anounced a microSD express card that is can hit sequential read speeds of up to 800 MB/s, which is 1.4 times faster than a SATA SSDs. So why purchase an NVMe HAT adapter...
View ArticleHATs and other add-ons • GPIO Pin Extenders
Hi there,I need GPIO extenders so my students can use the new RPi5 with the red case on it. Would any extenders that worked with RPi3 work fine with RPi5? Just checking to make sure before I...
View ArticleClik here to view.
HATs and other add-ons • Re: GPIO Pin Extenders
They're all the same pins, so yes There are different heights and placement of the various components on each model of Raspberry Pi, so you would be advised to test attaching things to the Pi 5 to...
View ArticleClik here to view.
HATs and other add-ons • Re: Pi 5 Official Case with Active Cooler
when using the active cooler in the official case you will have to remove the transparent part (which mounts the fan) from the chassis. There can be only one Statistics: Posted by aBUGSworstnightmare...
View ArticleHATs and other add-ons • Out of Disk on a 2 TB M.2 but not using all space
Hi!I have installed a Pimoroni NVMe base with a 2TB M.2 disk on a Raspberry Pi 5 and used this guide to make it bootable.https://learn.pimoroni.com/article/gett ... -nvme-baseOS is Lite 64-bitI used...
View ArticleHATs and other add-ons • Re: Out of Disk on a 2 TB M.2 but not using all space
Use raspi-config to expand the root file systemStatistics: Posted by DirkS — Sun Mar 10, 2024 7:53 am
View ArticleHATs and other add-ons • 5” DSI screen, some windows are too big?
I have a Pi 4B with a 5” DSI screen (Waveshare). It works fine, but some windows open a bit too large or way too large. The standard terminal emulator opens just fitting the screen, but you have to...
View ArticleHATs and other add-ons • Re: NVMe x4 and x1 compatibility?
Dear friends, Here they explain the procedure to eliminate pci:corrected errors, in my case it works, anyone who has errors can try it.https://github.com/geerlingguy/raspberr ... issues/559kind...
View ArticleHATs and other add-ons • Re: nvme base geekworm
Dear friends, Here they explain the procedure to eliminate pci:corrected errors, in my case it works, anyone who has errors can try it.https://github.com/geerlingguy/raspberr ... issues/559kind...
View ArticleClik here to view.
HATs and other add-ons • Pi 5 PCIe PWR_EN vs RST timing
Can anyone tell me whether the Pi 5 observes the PCIe standard specification for timing of the RST signal versus power rails? The specification says that there must be a minimum 100ms delay between...
View ArticleHATs and other add-ons • Re: Pi 5 PCIe PWR_EN vs RST timing
Yes it does.Statistics: Posted by jdb — Sun Mar 10, 2024 5:31 pm
View ArticleClik here to view.
HATs and other add-ons • Re: Pi 5 Official Case with Active Cooler
when using the active cooler in the official case you will have to remove the transparent part (which mounts the fan) from the chassis. There can be only one ROFLI know that the original has to be...
View Article