HATs and other add-ons • Re: Rpi All-In-One 10in display touch difficult to use
I would go back to the vendor of that 3rd party display and ask for your money back.Statistics: Posted by neilgl — Fri Jun 07, 2024 9:12 pm
View ArticleHATs and other add-ons • Re: AI accelerator chip opportunities?
My occasional voice to text uses whisper on an Intel machine. That can run on a Pi with 2 GB. It might run faster with an extra chip but it runs in the background while I am doing other things. If the...
View ArticleHATs and other add-ons • Pi board with inbuilt regulator and Mosfets
Hi there,I have a set up with a Pico W operating 5x coin motors via PWM, with a regulator and Mosfets. I’m searching for a way to make this device smaller. I wondered if there’s a Pi board with...
View ArticleHATs and other add-ons • Re: Pi board with inbuilt regulator and Mosfets
Since you are driving motors you could take a look at some CNC modules. They integrate stepper drivers in quite a small space. You might find a stepper driver that will work with your motor, maybe as...
View ArticleHATs and other add-ons • Backplates for RPi5?
Are there any backplates, like they have on PCs for the connectorsI need this for a personal project that I'm doingStatistics: Posted by RaspyHat — Sat Jun 08, 2024 8:23 pm
View ArticleHATs and other add-ons • Re: Backplates for RPi5?
Are there any backplates, like they have on PCs for the connectorsI need this for a personal project that I'm doingDo you mean backplane? It helps if you actually know what you are looking...
View ArticleHATs and other add-ons • Unable to boot Bullseye with HAT+
I wanted to boot Bullseye to test an application and I need an older version of the OS.Bit since my NVME HAT+ from Raspberry Pi I am not able to boot an older version of the OS.Also have removed the...
View ArticleHATs and other add-ons • Re: New M.2 NVMe HAT+ in Official Pi 5 case
Also it would be nice if the NVME drive screw has a philips head.Statistics: Posted by jslegers — Sun Jun 09, 2024 5:28 pm
View ArticleHATs and other add-ons • Re: Unable to boot Bullseye with HAT+
Which Pi are you using Pi5 or Pi4 or other?Statistics: Posted by neilgl — Sun Jun 09, 2024 6:18 pm
View ArticleHATs and other add-ons • Pi4 + MCP2515 HAT = no can0, can1 devices
Hi everyone!Right now i'm trying to bring up Waveshare 2-CH CAN HAT+ with Pi4. (https://www.waveshare.com/wiki/2-CH_CAN_HAT+)TL:DR: Everything seems fine, yet no can0 and can1 interfaces.Jumpers on...
View ArticleHATs and other add-ons • Re: Pi4 + MCP2515 HAT = no can0, can1 devices
Almost forgot! Part of config.txt responsible for CAN HAT:Code: dtparam=spi=on # global SPI ondtoverlay=i2c0 # i have no idea what's up with i2c, manufacturer says sodtoverlay=spi1-3cs # init SPI1...
View ArticleHATs and other add-ons • Re: AI accelerator chip opportunities?
My occasional voice to text uses whisper on an Intel machine. That can run on a Pi with 2 GB. It might run faster with an extra chip but it runs in the background while I am doing other things. If the...
View ArticleHATs and other add-ons • Re: Pi 5 and Waveshare 3.2” HDMI -pogo pins
Raspberry Pi 5 has a "flusher" GPIO connector so all board that use pogo pins on the underside will have issues.I have added two blobs of solder on the 2 power pins (4 and 6) so that they are higher...
View ArticleHATs and other add-ons • Re: Is the speed of the Raspberry Pi M.2 HAT + SSD...
Gen 2 1-lane: 5GT/s (~4gbit/s full-duplex)Gen 3 1-lane: 8GT/s (~7.876gbit/s full-duplex).By default the root complex only advertises Gen 2 as its max link speed. Most SSDs can make full use of the Gen...
View ArticleHATs and other add-ons • Re: AI Kit + NVMe SSD ?
Consider the Pimoroni NVMe Base Duo for Raspberry Pi 5.With the latest firmware it boots from NVME, and it is tested to work with the Hailo AIhttps://shop.pimoroni.com/products/nvme ......
View ArticleClik here to view.
HATs and other add-ons • Re: New Official AI Kit available now at $70
Sorry for potentially hijacking this thread, but I'm neither able to post at https://community.hailo.ai/ nor access things like the Dataflow Compiler User Guide from...
View ArticleHATs and other add-ons • Best Cases for Raspberry Pi 5 with NVMe and PoE
Hi everyone,I’m looking for a case for my Raspberry Pi 5 that supports both NVMe storage and a PoE HAT. Specifically, I plan to use the Pimoroni NVMe Base and the Wavehare PoE Hat. What are the best...
View ArticleClik here to view.
HATs and other add-ons • Re: Best Cases for Raspberry Pi 5 with NVMe and PoE
I have one of these https://kksb-cases.com/products/kksb-ra ... and-coolerThe pimoroni NVMe base is mounted on top of the Pi5i have the 50mm FPC installed https://shop.pimoroni.com/products/pcie ......
View ArticleHATs and other add-ons • Re: Backplates for RPi5?
My bet is OP is asking for an I/O-shield (the metal plate which covers the IO area of a mainboard).Yes, that's what I meanyou will have to do that your self! Will also need mounting provivion for the...
View ArticleHATs and other add-ons • AI Kit - How to use GPIOs?
Hi,I have the Hailo8 AI KIT. Somehow the hat seems to block all GPIO pins. Any suggestion how to use GPIO together with the AI kit?Thanks in advance. Best, RalfStatistics: Posted by smullyan-dev — Thu...
View Article