HATs and other add-ons • Re: Booting Ubuntu from WD_BLACK SN770M falls back...
Created a GitHub issue with captures made with the debug probe: https://github.com/raspberrypi/linux/issues/6232Statistics: Posted by iamursky — Wed Jun 19, 2024 10:54 am
View ArticleHATs and other add-ons • Re: Stacking multiple official HATs on Raspberry Pi
Can multiple official HATs be connected to the Raspberry Pi and stacked together at the same time?It depends.The current setup is:Raspberry Pi 5Official RPi 5 case (with top cover removed)Official RPi...
View ArticleHATs and other add-ons • Raspberry Pi M.2 HAT+ Ribbon Cable
Good Day Everyone,I have a question about the Raspberry Pi M.2 HAT+ ribbon cable that comes with the hat. I'm going to stack this on top of a Waveshare POE hat that has a GPIO header (5V 4.5A). I'm...
View ArticleHATs and other add-ons • Re: Raspberry Pi M.2 HAT+ Ribbon Cable
I just found this: https://www.pishop.us/product/pcie-flex ... pipe-50mm/Wondering if this would work. They talk about nvme but I'm going to use an Intel AX210 in the m.2 slot. This type of cable...
View ArticleHATs and other add-ons • Re: PI5 with m.2 hat (Geekworm X1003) doesnt work...
So that is the difference!I emailed Geekworm and they are going to send me the new cable from China.That sounds great. I hope that solves the problem for you.I have good news to report.Geekworm sent...
View ArticleHATs and other add-ons • M.2+ Hat nvme not being recognized.
Hi, I recently purchased the M.2+ hat along with a 1tb nvme from the raspberry pi store. I'm trying to get it to boot on my new pi5, but for some reason it fails to recognize the device. I went...
View ArticleHATs and other add-ons • Re: M.2+ Hat nvme not being recognized.
most likely not the hatin most instances it's a incompatible ssd, check there compatibility list or ask them of known drive issues.i know there's 1 certain chip type in the ssd's that just don't work,...
View ArticleHATs and other add-ons • Re: build hat serial protocol pid
ah thats it, that is helpfullthanks for your answer.The "process variable" is PV in the Wikipedia page I linked. The "differentiator" mode is described there under the "Derivative of the process...
View ArticleHATs and other add-ons • Re: Stacking multiple official HATs on Raspberry Pi
I make it potentially fourYeah, but it's not feasible to have two power HAT+ connected, hence why I said three.sure it is! Cut the I2C pins on your stacking headers, load the overlays needed...
View ArticleHATs and other add-ons • HATs for connecting to the Internet without using...
Hi,I'm just wondering the best HAT's/extension for the Raspberry Pi 5 or Zero for internet connectivity outside where WiFi is not accessible.I know this can be done using cellular data similar to any...
View ArticleHATs and other add-ons • Re: HATs for connecting to the Internet without...
Look at i.e.waveshare portfolio. They offer quite some solutions (ob different budget).Sorry, can't comment on 'easy to setup' (or not).Statistics: Posted by aBUGSworstnightmare — Tue Jun 25, 2024...
View ArticleHATs and other add-ons • Pi 5 case for NVME?
Just wondering if any of the Argon cases for Pi 5 are capable of holding the NVME base duo?Statistics: Posted by Notaclue — Tue Jun 25, 2024 7:59 pm
View ArticleHATs and other add-ons • Re: Pi 5 case for NVME?
You'll probably get a faster answer directly from the horse's mouth.Ask here: https://forum.argon40.com/Statistics: Posted by memjr — Wed Jun 26, 2024 3:10 am
View ArticleHATs and other add-ons • Re: Raspberry pi 4 Camera enable
This post may help What to do if your camera is not detectedStatistics: Posted by rpdom — Tue Jun 25, 2024 11:00 pm
View ArticleHATs and other add-ons • RPi 5 Booting from SATA via JBM58x on PCIe
Is it possible to boot from a SATA drive connected via the PCIe interface?I have a SATA drive connected using a PCIe to NVMe adaptor and 5 port M.2 SATA adaptor which has a JMB58x chip, probably a...
View ArticleHATs and other add-ons • Re: RPi 5 Booting from SATA via JBM58x on PCIe
At the moment, I don't think the Pi 5's firmware bootloader supports booting from AHCI devices, so no, it's not possible to boot straight from a SATA device.According to this GitHub issue, which...
View ArticleClik here to view.
HATs and other add-ons • How to use a Vellman VMP-400 touchscreen as a...
Given the following:A raspberry Pi-4 running Raspberry Pi O/S Buster. (Buster is a hard requirement and cannot be changed.)A Vellman VMP-400 3.5" touchscreen display that connects via the GPIO pins as...
View ArticleHATs and other add-ons • HAT+ spec allows Zero size now?
Something that bugged me about the HAT spec was it did not allow for Pi Zero size boards because it specified dimensions. The new spec appears to have removed that constraint and just requires the...
View ArticleHATs and other add-ons • Re: How to use a Vellman VMP-400 touchscreen as a...
With Buster about to hit end of support (30th June 2024 - https://wiki.debian.org/LTS), don't expect a lot of support.Under Bookworm or a recent kernel, yes you can add "dtoverlay=piscreen,drm" and...
View ArticleHATs and other add-ons • Is using a DC 12v 1.05A pc fan safe for my Raspberry...
Im new to raspberry pi and I bought a small fan but it doesnt work. So I looked in my scrapped e waste bin and found a large ball bearing fan from a Windows Xp pc I scrapped a few weeks ago. It has 3...
View Article