HATs and other add-ons • Re: Pi 4 USB 3 to a flat cable under the board
Google is yoir friend i.e https://www.amazon.de/NFHK-Stecker-Verl ... d_source=1Statistics: Posted by aBUGSworstnightmare — Wed Oct 30, 2024 5:53 am
View ArticleHATs and other add-ons • Touch Grid
Hey, I'm trying to create a tablet with a Raspberry Pi 4 (2gb) a screen and a touch grid from aliexpress (connects with a USB to the Raspberry Pi)the touch grid is 225X173mm, I want to rotate it so it...
View ArticleHATs and other add-ons • Re: Touch Grid
Is you touch listed as input device?Have you used screen configuration editor to assign it to the screen it should be active on?When you rotate the screen you will have to reassign again (if memory...
View ArticleHATs and other add-ons • How to select specific drive to boot from
Hi people. I am hoping that you smarter people have the answer for me as I have hit a wall with all my Google searches/Youtube vids, all are just telling me how to boot from NVME. I have that working...
View ArticleHATs and other add-ons • NVMe overheating issues with GeekWorm dual NVMe hat
Hello,I've just upgraded from pi3 to pi5 and it seems a lot faster.Of course, by adding third party hardware, i have some issues with the peripherals. Here is my problem:- Using hardware setup from...
View ArticleHATs and other add-ons • Re: NVMe overheating issues with GeekWorm dual NVMe hat
for support on third party products you should ask third party to support.Might be a power consumption issue, with your adapter not able to support the current required by these two drives, can be a...
View ArticleHATs and other add-ons • Re: How to select specific drive to boot from
You can't set a specific drive to boot from in the firmware.The Pi will boot from the first bootable FAT32 partition it finds searching in the specified boot order.The work around I can suggest is as...
View ArticleHATs and other add-ons • PI-5 PCIE silly question's and hello
Hello, I'm Julian Davidson and an actual human. I know an awful lot about PC's, but little about PI's, having run a PI 4b for some time with Home Assistant (on a 1TB SATA drive) and some USB...
View ArticleHATs and other add-ons • Re: PI-5 PCIE silly question's and hello
Here's one optionhttps://thepihut.com/products/hatdrive- ... berry-pi-5I've not used one...Statistics: Posted by gordon77 — Fri Nov 01, 2024 7:48 pm
View ArticleHATs and other add-ons • WaveShare Stepper Motor Hat (HRB8825) + RPI 5 GPIO Busy
Hello, I've just got a waveshare HRB8825 stepper motor HAT for my RPI 5. I've been trying to get their demo code running correctly but keep running into issues with motor 2 (GPIO busy).I've done some...
View ArticleHATs and other add-ons • Pi4 TV-HAT continuity errors when ARM clock <1500MHz
I have replaced a Pi3B+ wearing a TV-HAT with a Pi4B v1.1 but this has a strange issue. All is fine and normal if there is enough load on 1 of the CPU cores such that a constant 1500MHz is deployed....
View ArticleHATs and other add-ons • Re: WaveShare Stepper Motor Hat (HRB8825) + RPI 5...
Maybe re-check what pin is being used to help avoid the possible confusion between GPIO4 (physical pin 7) and physical pin4. See https://pinout.xyz/#Also it says on their website about the...
View ArticleHATs and other add-ons • Re: Can I connect multiple PCIe hats to an RPi5?
Hi geerlingguyWhere can I get one of those multiport M2 PCIE boards in your photo. I am looking for 1 x Mkey, 2 x A/E Key and 1 x Bkey PCIe HAT for RPI5Statistics: Posted by usernamezzz — Mon Nov 04,...
View ArticleHATs and other add-ons • Re: Argon ONE V5 M.2 Case
Hi memjrYeah I did but they didn't provide any additional information other than it will be released Q4.I was hoping that someone (who wasn't under an NDA) may have seen an early sample at a trade...
View ArticleHATs and other add-ons • Re: AI HAT+ show no serial number
Check GitHub. It goes through how to troubleshoot the issue. In the end identify didn’t work for me but the models run fine.Statistics: Posted by FuzzyB — Mon Nov 04, 2024 11:35 am
View ArticleHATs and other add-ons • Did I destroy my LCD display?
I have just setup an old Adafruit RGB 16x2 LCD i2C Display. Was surprised, how easy it was, after installing the needed library. Since the HAT does also have 5 buttons, I wanted to play around with...
View ArticleHATs and other add-ons • Re: Pi4 TV-HAT continuity errors when ARM clock...
test config.txt:Code: arm_64bit=1auto_initramfs=1dtoverlay=disable-wifidtoverlay=disable-btarm_freq=600reboot went fine , but many continuity errorsdid dmesg:Code: [ 717.183065] rpivid feb10000.codec:...
View ArticleHATs and other add-ons • Power over Ethernet between 2 pi's
Hi,I was wondering if the following would work. I have 2 rpi 4B both with a PoE-hat. One of the RPI's is powered via the usual USB-C. With just connecting an ethernet cable between the two, is it...
View ArticleHATs and other add-ons • Re: Issues with Streaming OV5640 on RPI5 CSI0 Connector
Now asked again on viewtopic.php?t=378917. Locking.Statistics: Posted by 6by9 — Tue Nov 05, 2024 12:19 pm
View ArticleHATs and other add-ons • Re: Power over Ethernet between 2 pi's
I'm afraid not. The PoE hats take the 48V and convert it to 5.1V and send that to the GPIO header. You can't send 5V from the first Pi into the PoE 5.1V output and get it sent though the Hat to the...
View Article