HATs and other add-ons • Authentication required on new M.2 SSD
How do I remove the authentication on my new SSD installed. The drive fails to mount as it requires a password to access. I know the password as it is the same as my login. I have no idea if gparted...
View ArticleHATs and other add-ons • Re: Authentication required on new M.2 SSD
you're booting from uSD? What is the partition table of your drive? doesn't seem to automount --> asks for root PWD when you want to mount it.geparted will always prompt your for...
View ArticleHATs and other add-ons • Not getting full 5a from Pineboards HatDrive! POE+...
The HatDrive! POE+ for Raspberry Pi 5 advertises https://pineboards.io/products/hatdrive ... berry-pi-5 PoE+ support for full 25 W (5v, 5a) power. In practice, I am still seeing the power warning that...
View ArticleHATs and other add-ons • Re: Not getting full 5a from Pineboards HatDrive!...
Some specific questions:1. Am I supposed to be getting the full 5v/5a from the Pineboards HatDrive! PoE+?I don't know. Maybe try asking Pineboards.2. Is it possible that the OS thinks the board is not...
View ArticleHATs and other add-ons • PI 5won't recognize DS3231 RTC module
Hi folks, I'm trying to add this DS3231 RTC module to a Pi 5:https://www.amazon.com/dp/B08X4H3NBR?th=1While the Pi detects it, it won't make use of it. I was instructed to add these lines to the...
View ArticleHATs and other add-ons • Re: PI 5won't recognize DS3231 RTC module
A similar module works for me. The last two lines of my /boot/firmware/config.txt areCode: dtparam=rtc=offdtoverlay=i2c-rtc,ds3231i2cdetect -y 1 showsCode: rpdom@raspberrypi:~ $ i2cdetect -y 1 0 1 2 3...
View ArticleHATs and other add-ons • Re: WaveShare thermal camera HAT - Success!
I finally managed to get the software to work with the GPIO version.The module didn't work before because the ribbon cable was apparently not correctly connected into its socket. After removing and...
View ArticleHATs and other add-ons • Re: Has anyone tried the WaveShare thermal camera...
Hi, has anyone finally got the gpio version working, I am looking for solution for installating for rpi 4b. Maybe a compiled code already. I really need help as we will be using this module for our...
View ArticleHATs and other add-ons • Re: RASPBERRY PI USB 3 HUB - 11 Pin Connector Details
Thanks everbody for the suggestion, done connecting only red, black white and green to usb 2.0 usb connector pads (soldered directly to the pcb after securing the wires to the pcb with silicon glue)...
View ArticleHATs and other add-ons • How Do I Image SSD On Hat Without Display?
Hi,I just assembled the following:1. Raspberry Pi 52. Raspberry Pi M.2 HAT+3. Raspberry Pi SSDI then imaged an SD card and SSHed into the PI successfully.Next I tried to image the SSD using rpi-imager...
View ArticleHATs and other add-ons • Re: How Do I Image SSD On Hat Without Display?
rpi-imager also has a headless interface invoked using the --cli argument.See `man rpi-imager` or https://github.com/raspberrypi/rpi-imag ... i-imager.1 for more details.Statistics: Posted by procount...
View ArticleHATs and other add-ons • Raspberry DAC Pro audio cracks from 3.5mm port
I'm testing the DAC Pro with Pianoteq 8. I found that if I use the 3.5mm audio port I get cracks in the audio, especially with higher notes, but from the RCA ports the output is perfect. May someone...
View ArticleClik here to view.
HATs and other add-ons • slideshow with mpr121 capacitive touch HAT
crossposting this from adafruit forums as well, but figured i'd check here to see if anyone has additional input. i'm a total beginner very new to rpi. the first time i used python was a few days ago....
View ArticleHATs and other add-ons • Re: Arducam ribbon cable alternative?
Thank you for the idea, I'll look into that for another project, but right now I need the HDMI port for the screen. The pair of adapters in the set don't use the Pi's onboard HDMI connector, they...
View ArticleHATs and other add-ons • Anyone using Geeek X1001 M.2 hat?
Is anyone using the X1001 M.2 hat? If so could you post the output of:Code: # find /sys -name '*nvme*'I am wondering if it exposes the temperature of an attached M.2 device to the /sys filesystem....
View ArticleHATs and other add-ons • Re: Anyone using Geeek X1001 M.2 hat?
You can get the temp i.e by using nvme-cli .What do you want to do with the temp-data? Once tried to expose it to hwmon in order to use it as input data for fan control...
View ArticleHATs and other add-ons • Re: slideshow with mpr121 capacitive touch HAT
Have you already got a simple python script running to "get back readings that input has been received"?If so post it here so we can look at it.Statistics: Posted by neilgl — Sat Feb 22, 2025 1:03 pm
View ArticleHATs and other add-ons • pcie to ssd and then adding GPU
I bought a rpi 5 8gb ram which is running from sd card. I want to add an ssd using pi m.2 hat. I also want to see how to another pcie to m2 for adding gpu?Statistics: Posted by newplayer1 — Mon Feb...
View ArticleHATs and other add-ons • Re: pcie to ssd and then adding GPU
Check Jeff Geerling's yt ch and github.Statistics: Posted by Gavinmc42 — Tue Feb 25, 2025 2:50 am
View ArticleHATs and other add-ons • Re: Mic Respeaker on raspberry pi 5
Hey there, I have this working on a Raspberry pi 5:https://www.amazon.com/KEYESTUDIO-ReSpe ... 07H3T8SQY/I am able to get voice in, voice out and button/LED control.Do know my RP5 is crashing and I am...
View Article