HATs and other add-ons • Re: Cellular Data Hat compatiblity...
Where are you from? Specific region? Thats the main question.There are three narrowband standards:* LTE-M* NB-IOT1* NB-IOT2Not all modems support all standards, and no modem supports all transmission...
View ArticleHATs and other add-ons • Re: IQaudIO Pi-DAC Pro not detected by Raspberry Pi 5
Hi!I've got the exact same issue with an even simpler setup as I don't use an nvme adapter.I'd fancy you share it if anything finally worked for you! I'll do the same on my side.Statistics: Posted by...
View ArticleHATs and other add-ons • Re: Build Hat
It worked for a while and now a different student is having issues. This is the error they are getting now.Traceback (most recent call last): File "<string>", line 3, in <module> File...
View ArticleHATs and other add-ons • 3.5 inch Waveshare touchscreen is black
I bought this display: https://www.amazon.ca/dp/B0DNQJD7BVI have hooked it up to the GPIO pins on my Pi according to this guide: https://coxxect.blogspot.com/2025/01/te ... touch.htmlHowever, upon...
View ArticleHATs and other add-ons • Re: 3.5 inch Waveshare touchscreen is black
Might be using the same display as waveshare SKU 30896.Will post some instructions how to use that here https://forums.raspberrypi.com/viewtopic.php?t=380704 so watch that threat.Note: that will be...
View ArticleHATs and other add-ons • Wireless display for RPi4
I am using a RPi4 in a CNC mill build using a PlanetCNC controller. I intend to have liquid part cooling/lubrication so I put my electronics inside a waterproof box and have the motors etc connected...
View ArticleHATs and other add-ons • Re: Wireless display for RPi4
think you should just tune vncwireless is okay for distance, but if you can use a wire, it would be bestyour replacing 1 hdmi cable with 2 dongles + 2 power cables + adapter for the piStatistics:...
View ArticleHATs and other add-ons • Re: A daughter board for the raspberry pi 4 that...
Open up a USB hub (fins a 'C' socket version).Find a miniature one, take the case off.Snip the USB connector for and solder to the USB points.That should keep it slim.Only really useful for adding a...
View ArticleHATs and other add-ons • Integrated Fan Controller
1.So today, I decied to try and use the fan controller that was built into the Pi, and I tried to set it down to 50 or 45 so it would turn on more often. When I tried this, it got limited to 60º. Is...
View ArticleHATs and other add-ons • Re: Integrated Fan Controller
Which Pi do you speak of? The only board which comes with a dedicated fan controller is the CM4IO. That chip uses PWM. Pi5 also uses PWM for fan control.On Pi5 you can change the fan curve by adding...
View ArticleHATs and other add-ons • What kind of cable connects to the M.2 HAT+ ?
I need a longer ribbon cable to connect the below M2 HAT+ to the pi and the connector on it is smaller than the normal ones, the description says it's a "subset of the of the M2 standard" but I have...
View ArticleHATs and other add-ons • Re: What kind of cable connects to the M.2 HAT+ ?
I need a longer ribbon cable to connect the below M2 HAT+ to the pi and the connector on it is smaller than the normal ones, the description says it's a "subset of the of the M2 standard" but I have...
View ArticleClik here to view.
HATs and other add-ons • Weather Station & Weather Hat
Hi, I'm using raspberry pi 4 B with a GPIO edge extension and a GPIO cable to the weather hat, i was wondering what pins does the 40 pin header use on the raspberry pi because i want to connect a...
View ArticleClik here to view.
HATs and other add-ons • Re: Weather Station & Weather Hat
Hi, I'm using raspberry pi 4 B with a GPIO edge extension and a GPIO cable to the weather hat, i was wondering what pins does the 40 pin header use on the raspberry pi because i want to connect a...
View ArticleHATs and other add-ons • Re: connecting tp-link archer t3u nano mu-mimo usb...
any help with getting this to work on my raspberry pi 2b with octoprint on it is appreciated(i dont know anything about getting the drivers and what to do with them and if the myu-mimo is even...
View ArticleHATs and other add-ons • Re: Unable to make 2 USB cameras work
I am building a robot that requires locating a camera 3 feet from my pi 5 and itmust also pivot. I have a pi Camera v3 that works but I cannot find a 3 foot ribbon cable so I decided on a USB camera...
View ArticleHATs and other add-ons • Re: Waveshare 3.5 inch SPI display - touch isn't...
You'll need a kernel driver for FocalTech FT6236 and an overlay to start it.FT6236 is supported by the edt-ft5x06 driver (same as FT5406 used on the Pi 7" DSI display)FT6336U isn't listed as...
View ArticleHATs and other add-ons • Re: Connect Pi-5 to internet with SIM card
I've got plenty of experience with Waveshare. I've bought two of these for work.https://www.waveshare.com/product/iot-c ... it-eth.htmThese are really neat things. It's basically a Queltec M.2 modem...
View ArticleClik here to view.
HATs and other add-ons • Re: Build Hat
fail with whatever message is thrown by underlying modules.Makes the code "messy" Statistics: Posted by mspl — Mon Apr 21, 2025 11:53 pm
View ArticleHATs and other add-ons • Does a True DAC HAT Exist - not an audio DAC
I'd like to produce different square waves, sine waves and other fun waves. But everything is an audio output rather than just a regular DAC that will put out a voltage level and just "stick it", even...
View Article