HATs and other add-ons • Equalizer for DigiAMP+ & RPi3B+
I have set up my RPi3B+ with DigiAmp+ HAT and some older boombox speakers with incorporated woofers. I installed LibreELEC to act as mediaserver.The sound is, well, non-optimal. I have tried to...
View ArticleHATs and other add-ons • Re: GPSD & CGPS with NU-353N USB GPS
Why are you trying cgps?if gpsmon works this then the GNSS/GPS device is working. It means gpsd should be working too. That's what the auto USB is doing for you. I wouldn't touch anything else.Ifcat...
View ArticleHATs and other add-ons • Re: Issue with using GPS and LTE network with Sim7000X
Sorry for the late reply. I've managed to get it working for both, GPS and the Internet, but I needed to use a USB cable for it and access GPS or Internet through serial and other through USB. The...
View ArticleHATs and other add-ons • Re: Case with display and UPS
Thanks for your advice and sorry for not responding sooner, caught a bad case of the flu over the Easter weekend. We are thinking about a commercial development here, so if the time comes, I think...
View ArticleHATs and other add-ons • Re: Can’t install sense hat emulator
I'm having the exact same issue, did you find a solution?Statistics: Posted by Slowhorse124 — Wed Apr 10, 2024 3:29 am
View ArticleHATs and other add-ons • RS232 interfaceing with RaspberryPI 4
I am working on a project where I need the PI to connect to a serial port (RS-232 with db9 connector).What are the reasons I should NOT connect to the GPIO pins?Anyone have suggestions for a HAT I can...
View ArticleClik here to view.
HATs and other add-ons • Zero sized HAT on 3a+ board
I want to mount a "Raspberry Pi Codec Zero" HAT on a "Raspberry Pi 3A+". Obviously the GPIO connector (and the adjacent pre-drilled mounting holes) will mate, but there are no pre-drilled holes on the...
View ArticleHATs and other add-ons • Re: Zero sized HAT on 3a+ board
I want to mount a "Raspberry Pi Codec Zero" HAT on a "Raspberry Pi 3A+". Obviously the GPIO connector (and the adjacent pre-drilled mounting holes) will mate, but there are no pre-drilled holes on the...
View ArticleHATs and other add-ons • Re: RS232 interfaceing with RaspberryPI 4
What are the reasons I should NOT connect to the GPIO pins?RS232C signal voltages are often well outside what the GPIO pins can tolerate and the signal polarity is inverted to what a Pi UART usually...
View ArticleHATs and other add-ons • DigiAMP+ no stereo output
Hi!I'm a sound designer destined to setup several Raspberry Pi 3 B+ & DigiAMP+ pairs. With my very limited raspberrian skills, I've managed to get sound out of the sound cards. But I have a...
View ArticleHATs and other add-ons • 10.1 Cap LCD Waveshare Display
Hi, I am making myself a RPI5 tablet, something like raspad(which is not available in my geography).. I got myself this display from waveshare https://www.waveshare.com/wiki/10.1DP-CAPLCD Things are...
View ArticleHATs and other add-ons • Re: 10.1 Cap LCD Waveshare Display
HelloIf you have any questions about waveshare products, you can send an email to support@waveshare.com and we will be happy to answer your questionsStatistics: Posted by aBUGSworstnightmare — Wed Apr...
View ArticleHATs and other add-ons • Re: Quectel EC200A-AU sms
Just a quick wrap-up here for anyone else who ends up in the same boat as I've just been. I knew what I wanted to do. I was pretty sure it was going to work. It's been a mixture of fun/frustration...
View ArticleHATs and other add-ons • Raspberry Pi E-Sim Modem
Is there any Raspberry Pi devices available which you can add an E-Sim to and then use the Rasberry Pi as a GSM device using the E-Sim?Statistics: Posted by jaketurner877 — Sat Apr 13, 2024 4:30 am
View ArticleHATs and other add-ons • Re: DigiAMP+ no stereo output
Problem solved. After flashing the OS and starting fresh, the audio is now working as it should.I suspect the problem was that at one point I had installed pydub, and even though I had uninstalled it,...
View ArticleClik here to view.
HATs and other add-ons • Re: Raspberry pi zero w + bigger battery
Thank you all Statistics: Posted by EFI — Sun Apr 14, 2024 2:49 pm
View ArticleHATs and other add-ons • Re: Problem booting from WD Blue SN580
Hi,anybody tried to allow the WD blue SN580 to warm up before booting? I tried many times and on different days that it booted and operated fine after leaving the pi and WD Blue together on for some...
View ArticleHATs and other add-ons • SATA SSD with Lowest power consumption(with dram)
Alright, I need to know the lowest power consumption SATA ssd there is for Data transfer.I was thinking the 870 Evo.Basically I am planning on using it as an external drive to transfer os files and...
View ArticleHATs and other add-ons • Re: SATA SSD with Lowest power consumption(with dram)
What you're asking for is a moving target. The drive that meets your criterion this week may not be on the market next week. By next week some other drive may be released to does better than anything...
View ArticleHATs and other add-ons • IQAudio piDAC-Plus stopped working
I'm currently using a Raspberry Pi 5 as my office desktop and of course I listen to music while working. I got an IQAudio Pi-DAC + for this to connect my speakers with a cable, rather than with...
View Article